# $OpenBSD$ SNMP?= /usr/bin/snmp SNMPD?= /usr/sbin/snmpd -f ${.OBJDIR}/snmpd.conf SNMPGET?= ${SNMP} get SNMPGETNEXT?= ${SNMP} getnext SNMPBULKGET?= ${SNMP} bulkget SNMPWALK?= ${SNMP} walk SNMPBULKWALK?= ${SNMP} bulkwalk SNMPSET?= ${SNMP} set SNMPTRAP?= ${SNMP} trap REGRESS_ROOT_TARGETS= start stop REGRESS_SETUP_ONCE= start REGRESS_TARGETS= REGRESS_CLEANUP= stop REGRESS_SKIP_TARGETS= CLEANFILES= snmpd.conf: Makefile printf 'listen_addr="127.0.0.1"\n' > snmpd.conf printf 'listen6_addr="::1"\n\n' >> snmpd.conf printf '# Restrict daemon to listen on localhost only\n' >> snmpd.conf printf 'listen on $$listen_addr\n' >> snmpd.conf printf 'listen on tcp $$listen_addr\n' >> snmpd.conf printf 'listen on $$listen6_addr\n' >> snmpd.conf printf 'listen on tcp $$listen6_addr\n' >> snmpd.conf printf 'listen on $$listen_addr notify\n\n' >> snmpd.conf printf '# (ab)use sysContact for DisplayString (255a) testing\n' >> snmpd.conf printf 'system contact "Reyk Fl\303\266ter"\n' >> snmpd.conf printf 'system services 74\n\n' >> snmpd.conf printf '# Provide static user-defined SNMP OIDs\n' >> snmpd.conf printf 'oid 1.3.6.1.4.1.30155.42.3.1 name testStringValue read-only string "Test"\n' >> snmpd.conf printf 'oid 1.3.6.1.4.1.30155.42.3.2 name testStringValue read-only string "abcdefghijklmnopqrstuvwxyz"\n' >> snmpd.conf printf 'oid 1.3.6.1.4.1.30155.42.3.3 name testIntValue read-write string a\n' >> snmpd.conf printf 'oid 1.3.6.1.4.1.30155.42.3.4 name testIntValue read-write integer 1\n' >> snmpd.conf printf '# (ab)use usmUserName for SnmpAdminString (255t) tests\n' >> snmpd.conf printf 'oid 1.3.6.1.6.3.15.1.2.2.1.2.1 name testStringValue read-only string "Reyk Fl\303\266ter"\n' >> snmpd.conf printf 'oid 1.3.6.1.6.3.15.1.2.2.1.2.2 name testStringValue read-only string "Reyk Fl\303ter"\n' >> snmpd.conf printf "# 256 a's\n" >> snmpd.conf printf 'oid 1.3.6.1.6.3.15.1.2.2.1.2.3 name testStringValue read-only string "%s"\n' "$$(jot -ba 256 | tr -d '\n')" >> snmpd.conf printf "# 254 a's + replacement character\n" >> snmpd.conf printf 'oid 1.3.6.1.6.3.15.1.2.2.1.2.4 name testStringValue read-only string "%s\357\277\275"\n\n' "$$(jot -ba 254 | tr -d '\n')" >> snmpd.conf printf '# Enable SNMPv3 USM with authentication, encryption and two defined users\n' >> snmpd.conf printf 'seclevel none\n\n' >> snmpd.conf printf 'user md5_des authkey testtest auth hmac-md5 enckey testtest enc des\n' >> snmpd.conf printf 'user md5_aes authkey testtest auth hmac-md5 enckey testtest enc aes\n' >> snmpd.conf printf 'user sha1_des authkey testtest auth hmac-sha1 enckey testtest enc des\n' >> snmpd.conf printf 'user sha1_aes authkey testtest auth hmac-sha1 enckey testtest enc aes\n' >> snmpd.conf printf 'user sha224_des authkey testtest auth hmac-sha224 enckey testtest enc des\n' >> snmpd.conf printf 'user sha224_aes authkey testtest auth hmac-sha224 enckey testtest enc aes\n' >> snmpd.conf printf 'user sha256_des authkey testtest auth hmac-sha256 enckey testtest enc des\n' >> snmpd.conf printf 'user sha256_aes authkey testtest auth hmac-sha256 enckey testtest enc aes\n' >> snmpd.conf printf 'user sha384_des authkey testtest auth hmac-sha384 enckey testtest enc des\n' >> snmpd.conf printf 'user sha384_aes authkey testtest auth hmac-sha384 enckey testtest enc aes\n' >> snmpd.conf printf 'user sha512_des authkey testtest auth hmac-sha512 enckey testtest enc des\n' >> snmpd.conf printf 'user sha512_aes authkey testtest auth hmac-sha512 enckey testtest enc aes\n\n' >> snmpd.conf printf 'trap handle 1.3 "${.OBJDIR}/traphandle.sh"\n' >> snmpd.conf traphandle.sh: Makefile printf '#!/bin/sh\n\n' > traphandle.sh printf 'while read line; do\n' >> traphandle.sh printf '\tprintf "%%s\\n" "$$line" >> ${.OBJDIR}/trap_output\n' >> traphandle.sh printf 'done\n' >> traphandle.sh chmod +x traphandle.sh trap_output: Makefile touch trap_output chmod a+rw trap_output start: stop snmpd.conf traphandle.sh trap_output ${SUDO} ${SNMPD} stop: -${SUDO} pkill -xf "${SNMPD}" ### AGENT FORMAT REGRESS_TARGETS+= agent_udp_v4 CLEANFILES+= agent_udp_v4.res agent_udp_v4.exp agent_udp_v4: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udp:127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_v4_port CLEANFILES+= agent_udp_v4_port.res agent_udp_v4_port.exp agent_udp_v4_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udp:127.0.0.1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_v4_service CLEANFILES+= agent_udp_v4_service.res agent_udp_v4_service.exp agent_udp_v4_service: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udp:127.0.0.1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_v4_port CLEANFILES+= agent_v4_port.res agent_v4_port.exp agent_v4_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_v4_service CLEANFILES+= agent_v4_service.res agent_v4_service.exp agent_v4_service: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_v4 CLEANFILES+= agent_tcp_v4.res agent_tcp_v4.exp agent_tcp_v4: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcp:127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_v4_port CLEANFILES+= agent_tcp_v4_port.res agent_tcp_v4_port.exp agent_tcp_v4_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcp:127.0.0.1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udp6plain CLEANFILES+= agent_udp_udp6plain.res agent_udp_udp6plain.exp agent_udp_udp6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udp6:::1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udp6bracket CLEANFILES+= agent_udp_udp6bracket.res agent_udp_udp6bracket.exp agent_udp_udp6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udp6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udp6bracket_port CLEANFILES+= agent_udp_udp6bracket_port.res agent_udp_udp6bracket_port.exp agent_udp_udp6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udp6:[::1]:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDP6plain CLEANFILES+= agent_udp_UDP6plain.res agent_udp_UDP6plain.exp agent_udp_UDP6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDP6:::1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDP6bracket CLEANFILES+= agent_udp_UDP6bracket.res agent_udp_UDP6bracket.exp agent_udp_UDP6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDP6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDP6bracket_port CLEANFILES+= agent_udp_UDP6bracket_port.res agent_udp_UDP6bracket_port.exp agent_udp_UDP6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDP6:[::1]:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udpv6plain CLEANFILES+= agent_udp_udpv6plain.res agent_udp_udpv6plain.exp agent_udp_udpv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udpv6:::1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udpv6bracket CLEANFILES+= agent_udp_udpv6bracket.res agent_udp_udpv6bracket.exp agent_udp_udpv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udpv6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udpv6bracket_port CLEANFILES+= agent_udp_udpv6bracket_port.res agent_udp_udpv6bracket_port.exp agent_udp_udpv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udpv6:[::1]:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDPv6plain CLEANFILES+= agent_udp_UDPv6plain.res agent_udp_UDPv6plain.exp agent_udp_UDPv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDPv6:::1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDPv6bracket CLEANFILES+= agent_udp_UDPv6bracket.res agent_udp_UDPv6bracket.exp agent_udp_UDPv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDPv6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDPv6bracket_port CLEANFILES+= agent_udp_UDPv6bracket_port.res agent_udp_UDPv6bracket_port.exp agent_udp_UDPv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDPv6:[::1]:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udpipv6plain CLEANFILES+= agent_udp_udpipv6plain.res agent_udp_udpipv6plain.exp agent_udp_udpipv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udpipv6:::1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udpipv6bracket CLEANFILES+= agent_udp_udpipv6bracket.res agent_udp_udpipv6bracket.exp agent_udp_udpipv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udpipv6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_udpipv6bracket_port CLEANFILES+= agent_udp_udpipv6bracket_port.res agent_udp_udpipv6bracket_port.exp agent_udp_udpipv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic udpipv6:[::1]:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDPIPv6plain CLEANFILES+= agent_udp_UDPIPv6plain.res agent_udp_UDPIPv6plain.exp agent_udp_UDPIPv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDPIPv6:::1:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDPIPv6bracket CLEANFILES+= agent_udp_UDPIPv6bracket.res agent_udp_UDPIPv6bracket.exp agent_udp_UDPIPv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDPIPv6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_udp_UDPIPv6bracket_port CLEANFILES+= agent_udp_UDPIPv6bracket_port.res agent_udp_UDPIPv6bracket_port.exp agent_udp_UDPIPv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic UDPIPv6:[::1]:snmp sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcp6plain CLEANFILES+= agent_tcp_tcp6plain.res agent_tcp_tcp6plain.exp agent_tcp_tcp6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcp6:::1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcp6bracket CLEANFILES+= agent_tcp_tcp6bracket.res agent_tcp_tcp6bracket.exp agent_tcp_tcp6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcp6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcp6bracket_port CLEANFILES+= agent_tcp_tcp6bracket_port.res agent_tcp_tcp6bracket_port.exp agent_tcp_tcp6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcp6:[::1]:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCP6plain CLEANFILES+= agent_tcp_TCP6plain.res agent_tcp_TCP6plain.exp agent_tcp_TCP6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCP6:::1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCP6bracket CLEANFILES+= agent_tcp_TCP6bracket.res agent_tcp_TCP6bracket.exp agent_tcp_TCP6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCP6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCP6bracket_port CLEANFILES+= agent_tcp_TCP6bracket_port.res agent_tcp_TCP6bracket_port.exp agent_tcp_TCP6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCP6:[::1]:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcpv6plain CLEANFILES+= agent_tcp_tcpv6plain.res agent_tcp_tcpv6plain.exp agent_tcp_tcpv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcpv6:::1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcpv6bracket CLEANFILES+= agent_tcp_tcpv6bracket.res agent_tcp_tcpv6bracket.exp agent_tcp_tcpv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcpv6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcpv6bracket_port CLEANFILES+= agent_tcp_tcpv6bracket_port.res agent_tcp_tcpv6bracket_port.exp agent_tcp_tcpv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcpv6:[::1]:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCPv6plain CLEANFILES+= agent_tcp_TCPv6plain.res agent_tcp_TCPv6plain.exp agent_tcp_TCPv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCPv6:::1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCPv6bracket CLEANFILES+= agent_tcp_TCPv6bracket.res agent_tcp_TCPv6bracket.exp agent_tcp_TCPv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCPv6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCPv6bracket_port CLEANFILES+= agent_tcp_TCPv6bracket_port.res agent_tcp_TCPv6bracket_port.exp agent_tcp_TCPv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCPv6:[::1]:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCPv6bracket_port CLEANFILES+= agent_tcp_TCPv6bracket_port.res agent_tcp_TCPv6bracket_port.exp agent_tcp_tcpipv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcpipv6:::1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcpipv6bracket CLEANFILES+= agent_tcp_tcpipv6bracket.res agent_tcp_tcpipv6bracket.exp agent_tcp_tcpipv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcpipv6:[::1] sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_tcpipv6bracket_port CLEANFILES+= agent_tcp_tcpipv6bracket_port.res agent_tcp_tcpipv6bracket_port.exp agent_tcp_tcpipv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic tcpipv6:[::1]:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCPIPv6plain CLEANFILES+= agent_tcp_TCPIPv6plain.res agent_tcp_TCPIPv6plain.exp agent_tcp_TCPIPv6plain: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCPIPv6:::1:161 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCPIPv6bracket CLEANFILES+= agent_tcp_TCPIPv6bracket.res agent_tcp_TCPIPv6bracket.exp agent_tcp_TCPIPv6bracket: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCPIPv6:[::1] sysServices.0 > $@.res diff -u $@.exp $@.res REGRESS_TARGETS+= agent_tcp_TCPIPv6bracket_port CLEANFILES+= agent_tcp_TCPIPv6bracket_port.res agent_tcp_TCPIPv6bracket_port.exp agent_tcp_TCPIPv6bracket_port: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic TCPIPv6:[::1]:161 sysServices.0 > $@.res diff -up $@.exp $@.res ### USM REGRESS_TARGETS+= usm_noauthnopriv CLEANFILES+= usm_noauthnopriv.res usm_noauthnopriv.exp usm_noauthnopriv: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l noauthnopriv -u md5_des 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authnopriv_md5 CLEANFILES+= usm_authnopriv_md5.res usm_authnopriv_md5.exp usm_authnopriv_md5: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authnopriv -u md5_des -a md5 -A testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authnopriv_sha1 CLEANFILES+= usm_authnopriv_sha1.res usm_authnopriv_sha1.exp usm_authnopriv_sha1: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authnopriv -u sha1_des -a sha -A testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authnopriv_sha224 CLEANFILES+= usm_authnopriv_sha224.res usm_authnopriv_sha224.exp usm_authnopriv_sha224: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authnopriv -u sha224_des -a sha-224 -A testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authnopriv_sha256 CLEANFILES+= usm_authnopriv_sha256.res usm_authnopriv_sha256.exp usm_authnopriv_sha256: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authnopriv -u sha256_des -a sha-256 -A testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authnopriv_sha384 CLEANFILES+= usm_authnopriv_sha384.res usm_authnopriv_sha384.exp usm_authnopriv_sha384: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authnopriv -u sha384_des -a sha-384 -A testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authnopriv_sha512 CLEANFILES+= usm_authnopriv_sha512.res usm_authnopriv_sha512.exp usm_authnopriv_sha512: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authnopriv -u sha512_des -a sha-512 -A testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_md5_des CLEANFILES+= usm_authpriv_md5_des.res usm_authpriv_md5_des.exp usm_authpriv_md5_des: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u md5_des -a md5 -A testtest -x des -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_md5_aes CLEANFILES+= usm_authpriv_md5_aes.res usm_authpriv_md5_aes.exp usm_authpriv_md5_aes: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u md5_aes -a md5 -A testtest -x aes -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha1_des CLEANFILES+= usm_authpriv_sha1_des.res usm_authpriv_sha1_des.exp usm_authpriv_sha1_des: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha1_des -a sha -A testtest -x des -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha1_aes CLEANFILES+= usm_authpriv_sha1_aes.res usm_authpriv_sha1_aes.exp usm_authpriv_sha1_aes: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha1_aes -a sha -A testtest -x aes -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha224_des CLEANFILES+= usm_authpriv_sha224_des.res usm_authpriv_sha224_des.exp usm_authpriv_sha224_des: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha224_des -a sha-224 -A testtest -x des -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha224_aes CLEANFILES+= usm_authpriv_sha224_aes.res usm_authpriv_sha224_aes.exp usm_authpriv_sha224_aes: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha224_aes -a sha-224 -A testtest -x aes -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha256_des CLEANFILES+= usm_authpriv_sha256_des.res usm_authpriv_sha256_des.exp usm_authpriv_sha256_des: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha256_des -a sha-256 -A testtest -x des -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha256_aes CLEANFILES+= usm_authpriv_sha256_aes.res usm_authpriv_sha256_aes.exp usm_authpriv_sha256_aes: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha256_aes -a sha-256 -A testtest -x aes -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha384_des CLEANFILES+= usm_authpriv_sha384_des.res usm_authpriv_sha384_des.exp usm_authpriv_sha384_des: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha384_des -a sha-384 -A testtest -x des -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha384_aes CLEANFILES+= usm_authpriv_sha384_aes.res usm_authpriv_sha384_aes.exp usm_authpriv_sha384_aes: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha384_aes -a sha-384 -A testtest -x aes -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha512_des CLEANFILES+= usm_authpriv_sha512_des.res usm_authpriv_sha512_des.exp usm_authpriv_sha512_des: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha512_des -a sha-512 -A testtest -x des -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= usm_authpriv_sha512_aes CLEANFILES+= usm_authpriv_sha512_aes.res usm_authpriv_sha512_aes.exp usm_authpriv_sha512_aes: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v3 -l authpriv -u sha512_aes -a sha-512 -A testtest -x aes -X testtest 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res ### OUTPUT FORMAT REGRESS_TARGETS+= output_string CLEANFILES+= output_string.exp output_string.res output_string: printf "sysDescr.0 = STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_integer CLEANFILES+= output_integer.res output_integer.exp output_integer: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_oid CLEANFILES+= output_oid.res output_oid.exp output_oid: # The OID name used here is not compatible with net-snmp, so this # might change in the future. printf "sysObjectID.0 = OID: localSystem.1\n" > $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1 sysObjectID.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_hexstring CLEANFILES+= output_hexstring.res output_hexstring.exp output_hexstring: # (Ab)use table for known unknown Hex-string. In this case: lladdr printf "ifPhysAddress.1 = Hex-STRING: " > $@.exp ifconfig $$(${SNMPGET} -v2c -cpublic 127.0.0.1 ifDescr.1 | awk '{print $$4}') | awk '/lladdr/{gsub(":", " ", $$2); print toupper($$2)}' >> $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1 ifPhysAddress.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_ipstring CLEANFILES+= output_ipstring.res output_ipstring.exp output_ipstring: printf "ipAdEntAddr.127.0.0.1 = IpAddress: 127.0.0.1\n" > $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1 ipAdEntAddr.127.0.0.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiettype_string CLEANFILES+= output_quiettype_string.res output_quiettype_string.exp output_quiettype_string: printf "sysDescr.0 = %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -v2c -cpublic -OQ 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiettype_integer CLEANFILES+= output_quiettype_integer.res output_quiettype_integer.exp output_quiettype_integer: printf "sysServices.0 = 74\n" > $@.exp ${SNMPGET} -v2c -cpublic -OQ 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiettype_oid CLEANFILES+= output_quiettype_oid.res output_quiettype_oid.exp output_quiettype_oid: # The OID name used here is not compatible with net-snmp, so this # might change in the future. printf "sysObjectID.0 = localSystem.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -OQ 127.0.0.1 sysObjectID.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiettype_ipstring CLEANFILES+= output_quiettype_ipstring.res output_quiettype_ipstring.exp output_quiettype_ipstring: printf "ipAdEntAddr.127.0.0.1 = 127.0.0.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -OQ 127.0.0.1 ipAdEntAddr.127.0.0.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiettype_hexstring CLEANFILES+= output_quiettype_hexstring.res output_quiettype_hexstring.exp output_quiettype_hexstring: # (Ab)use table for known unknown Hex-string. In this case: lladdr printf "ifPhysAddress.1 = " > $@.exp ifconfig $$(${SNMPGET} -v2c -cpublic -OQ 127.0.0.1 ifDescr.1 | awk '{print $$3}') | awk '/lladdr/{gsub(":", " ", $$2); print toupper($$2)}' >> $@.exp ${SNMPGET} -v2c -cpublic -OQ 127.0.0.1 ifPhysAddress.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_varbind_string CLEANFILES+= output_varbind_string.res output_varbind_string.exp output_varbind_string: printf "STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -v2c -cpublic -Ov 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_varbind_integer CLEANFILES+= output_varbind_integer.res output_varbind_integer.exp output_varbind_integer: printf "INTEGER: 74\n" > $@.exp ${SNMPGET} -v2c -cpublic -Ov 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_varbind_oid CLEANFILES+= output_varbind_oid.res output_varbind_oid.exp output_varbind_oid: # The OID name used here is not compatible with net-snmp, so this # might change in the future. printf "OID: localSystem.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -Ov 127.0.0.1 sysObjectID.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_varbind_ipstring CLEANFILES+= output_varbind_ipstring.res output_varbind_ipstring.exp output_varbind_ipstring: printf "IpAddress: 127.0.0.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -Ov 127.0.0.1 ipAdEntAddr.127.0.0.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_varbind_hexstring CLEANFILES+= output_varbind_hexstring.res output_varbind_hexstring.exp output_varbind_hexstring: # (Ab)use table for known unknown Hex-string. In this case: lladdr printf "Hex-STRING: " > $@.exp ifconfig $$(${SNMPGET} -v2c -cpublic -Ov 127.0.0.1 ifDescr.1 | awk '{print $$2}') | awk '/lladdr/{gsub(":", " ", $$2); print toupper($$2)}' >> $@.exp ${SNMPGET} -v2c -cpublic -Ov 127.0.0.1 ifPhysAddress.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiettype_varbind CLEANFILES+= output_quiettype_varbind.res output_quiettype_varbind.exp output_quiettype_varbind: uname -a > $@.exp ${SNMPGET} -v2c -cpublic -OvQ 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_ascii CLEANFILES+= output_ascii.res output_ascii.exp output_ascii: # Not a full test, since a mac-address can contain all kind of weirdness, # so no guarantee that we handle everything. But I don't know a better # alternative at this moment. # Abuse $@.res for intermediate variable for easier cleanup. printf 'ifPhysAddress.1 = STRING: "' > $@.exp ${SNMPGET} -v2c -cpublic -OvQx 127.0.0.1 ifPhysAddress.1 | tr ' ' '\n' | while read byte; do printf "\x$${byte}" | tr -c '[:print:]' '.'; done >> $@.exp printf '"\n' >> $@.exp ${SNMPGET} -v2c -cpublic -Oa 127.0.0.1 ifPhysAddress.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_fulloid_mib CLEANFILES+= output_fulloid_mib.res output_fulloid_mib.exp output_fulloid_mib: printf ".iso.org.dod.internet.mgmt.mib_2.system.sysDescr.0 = STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -v2c -cpublic -Of 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_fulloid_varbind CLEANFILES+= output_fulloid_varbind.res output_fulloid_varbind.exp output_fulloid_varbind: printf ".iso.org.dod.internet.mgmt.mib_2.system.sysObjectID.0 = OID: .iso.org.dod.internet.private.enterprises.openBSD.localSystem.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -Of 127.0.0.1 sysObjectID.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_numoid_mib CLEANFILES+= output_numoid_mib.res output_numoid_mib.exp output_numoid_mib: printf ".1.3.6.1.2.1.1.1.0 = STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -v2c -cpublic -On 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_numoid_varbind CLEANFILES+= output_numoid_varbind.res output_numoid_varbind.exp output_numoid_varbind: printf ".1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.30155.23.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -On 127.0.0.1 sysObjectID.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiet_string CLEANFILES+= output_quiet_string.res output_quiet_string.exp output_quiet_string: printf "sysDescr.0 %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -v2c -cpublic -Oq 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiet_integer CLEANFILES+= output_quiet_integer.res output_quiet_integer.exp output_quiet_integer: printf "sysServices.0 74\n" > $@.exp ${SNMPGET} -v2c -cpublic -Oq 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiet_oid CLEANFILES+= output_quiet_oid.res output_quiet_oid.exp output_quiet_oid: # The OID name used here is not compatible with net-snmp, so this # might change in the future. printf "sysObjectID.0 localSystem.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -Oq 127.0.0.1 sysObjectID.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiet_ipstring CLEANFILES+= output_quiet_ipstring.res output_quiet_ipstring.exp output_quiet_ipstring: printf "ipAdEntAddr.127.0.0.1 127.0.0.1\n" > $@.exp ${SNMPGET} -v2c -cpublic -Oq 127.0.0.1 ipAdEntAddr.127.0.0.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_quiet_hexstring CLEANFILES+= output_quiet_hexstring.res output_quiet_hexstring.exp output_quiet_hexstring: # (Ab)use table for known unknown Hex-string. In this case: lladdr printf "ifPhysAddress.1 " > $@.exp ${SNMPGET} -v2c -cpublic -OQv 127.0.0.1 ifPhysAddress.1 >> $@.exp ${SNMPGET} -v2c -cpublic -Oq 127.0.0.1 ifPhysAddress.1 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_hex CLEANFILES+= output_hex.res output_hex.exp output_hex: # From testing net-snmp: hex mode wraps each 16 bytes. # It happens that od does the same. printf "localTest.3.2.0 = Hex-STRING: " > $@.exp printf "abcdefghijklmnopqrstuvwxyz" | od -An -tx1 | sed 's/^ *//;s/ / /g;s/ *$$//' | tr '[:lower:]' '[:upper:]' >> $@.exp ${SNMPGET} -v2c -cpublic -Ox 127.0.0.1 1.3.6.1.4.1.30155.42.3.2.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255t_utf8 CLEANFILES+= output_displayhint_255t_utf8.res output_displayhint_255t_utf8.exp output_displayhint_255t_utf8: printf "STRING: Reyk Flöter\n" > $@.exp LC_ALL=en_US.UTF-8 ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.6.3.15.1.2.2.1.2.1.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255t_ascii CLEANFILES+= output_displayhint_255t_ascii.res output_displayhint_255t_ascii.exp output_displayhint_255t_ascii: printf "STRING: Reyk Fl.ter\n" > $@.exp LC_ALL=C ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.6.3.15.1.2.2.1.2.1.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255t_invalchar_utf8 CLEANFILES+= output_displayhint_255t_invalchar_utf8.res output_displayhint_255t_invalchar_utf8.exp output_displayhint_255t_invalchar_utf8: printf "STRING: Reyk Fl�ter\n" > $@.exp LC_ALL=en_US.UTF-8 ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.6.3.15.1.2.2.1.2.2.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255t_invalchar_ascii CLEANFILES+= output_displayhint_255t_invalchar_ascii.res output_displayhint_255t_invalchar_ascii.exp output_displayhint_255t_invalchar_ascii: printf "STRING: Reyk Fl?ter\n" > $@.exp LC_ALL=C ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.6.3.15.1.2.2.1.2.2.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255t_truncatefull CLEANFILES+= output_displayhint_255t_truncatefull.res output_displayhint_255t_truncatefull.exp output_displayhint_255t_truncatefull: printf "STRING: %s\n" "$$(jot -ba 255 | tr -d '\n')" > $@.exp LC_ALL=en_US.UTF-8 ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.6.3.15.1.2.2.1.2.3.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255t_truncatehalf CLEANFILES+= output_displayhint_255t_truncatehalf.res output_displayhint_255t_truncatehalf.exp output_displayhint_255t_truncatehalf: printf "STRING: %s\n" "$$(jot -ba 254 | tr -d '\n')" > $@.exp LC_ALL=en_US.UTF-8 ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.6.3.15.1.2.2.1.2.4.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255a_utf8 CLEANFILES+= output_displayhint_255a_utf8.res output_displayhint_255a_utf8.exp output_displayhint_255a_utf8: printf "STRING: Reyk Fl��ter\n" > $@.exp LC_ALL=en_US.UTF-8 ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.2.1.1.4.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_255a_ascii CLEANFILES+= output_displayhint_255a_ascii.res output_displayhint_255a_ascii.exp output_displayhint_255a_ascii: printf "STRING: Reyk Fl??ter\n" > $@.exp LC_ALL=C-8 ${SNMPGET} -Ov -v2c -cpublic 127.0.0.1 1.3.6.1.2.1.1.4.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= output_displayhint_precedence CLEANFILES+= output_displayhint_precedence.res output_displayhint_precedence.exp output_displayhint_precedence: printf "sysDescr.0 = STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -Ox -v2c -cpublic 127.0.0.1 sysDescr.0 > $@.res diff -up $@.exp $@.res ### SNMP GET # We already tested most of get in the previous tests. # Just test the retrieval of multiple entries REGRESS_TARGETS+= get_multiple CLEANFILES+= get_multiple.res get_multiple.exp get_multiple: printf "sysServices.0 = INTEGER: 74\nsysDescr.0 = STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGET} -v2c -cpublic 127.0.0.1 sysServices.0 sysDescr.0 > $@.res diff -up $@.exp $@.res ### SNMP GETNEXT REGRESS_TARGETS+= getnext_simple CLEANFILES+= getnext_simple.res getnext_simple.exp getnext_simple: printf "sysDescr.0 = STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 system > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= getnext_multiple CLEANFILES+= getnext_multiple.res getnext_multiple.exp getnext_multiple: printf "sysServices.0 = INTEGER: 74\nsysDescr.0 = STRING: %s\n" "$$(uname -a)" > $@.exp ${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 sysLocation.0 system > $@.res diff -up $@.exp $@.res ### SNMP BULKGET # Building output manually is large and error prone: Assume get/getnext works REGRESS_TARGETS+= bulkget_simple CLEANFILES+= bulkget_simple.res bulkget_simple.exp bulkget_simple: IDX=1; while [ $$IDX -le 10 ]; do ${SNMPGET} -v2c -cpublic 127.0.0.1 sysORDescr.$$IDX; IDX=$$((IDX+1)); done > $@.exp ${SNMPBULKGET} -v2c -cpublic 127.0.0.1 sysORDescr > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= bulkget_multi CLEANFILES+= bulkget_multi.res bulkget_multi.exp bulkget_multi: IDX=1; while [ $$IDX -le 10 ]; do ${SNMPGET} -v2c -cpublic 127.0.0.1 sysORDescr.$$IDX; IDX=$$((IDX+1)); done > $@.exp IDX=1; while [ $$IDX -le 10 ]; do ${SNMPGET} -v2c -cpublic 127.0.0.1 sysORID.$$IDX; IDX=$$((IDX+1)); done >> $@.exp ${SNMPBULKGET} -v2c -cpublic 127.0.0.1 sysORDescr sysORID > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= bulkget_nonrep CLEANFILES+= bulkget_nonrep.res bulkget_nonrep.exp bulkget_nonrep: ${SNMPGET} -v2c -cpublic 127.0.0.1 sysDescr.0 > $@.exp IDX=1; while [ $$IDX -le 10 ]; do ${SNMPGET} -v2c -cpublic 127.0.0.1 sysORDescr.$$IDX; IDX=$$((IDX+1)); done >> $@.exp ${SNMPBULKGET} -v2c -cpublic -Cn1 127.0.0.1 sysDescr sysORDescr > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= bulkget_maxrep CLEANFILES+= bulkget_maxrep.res bulkget_maxrep.exp bulkget_maxrep: IDX=1; while [ $$IDX -le 5 ]; do ${SNMPGET} -v2c -cpublic 127.0.0.1 sysORDescr.$$IDX; IDX=$$((IDX+1)); done > $@.exp ${SNMPBULKGET} -v2c -cpublic -Cr5 127.0.0.1 sysORDescr > $@.res diff -up $@.exp $@.res ### SNMP WALK # Building output manually is large and error prone: Assume getnext works # Skip sysUptime, since it's a timer REGRESS_TARGETS+= walk_simple CLEANFILES+= walk_simple.res walk_simple.exp walk_simple: OID=system; while true; do OID="$$(${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 "$$OID")"; [ -n "$${OID%sys*}" ] && break; printf "%s\n" "$${OID}"; OID="$${OID%% *}"; done | grep -v ^sysUpTime.0 > $@.exp ${SNMPWALK} -v2c -cpublic 127.0.0.1 system | grep -v ^sysUpTime.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= walk_end CLEANFILES+= walk_end.res walk_end.exp walk_end: OID=system; while true; do OID="$$(${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 "$$OID")"; [ "$${OID%% *}" == "sysORLastChange.0" ] && break; printf "%s\n" "$${OID}"; OID="$${OID%% *}"; done | grep -v ^sysUpTime.0 > $@.exp ${SNMPWALK} -v2c -cpublic -CE sysORLastChange 127.0.0.1 system | grep -v ^sysUpTime.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= walk_includeoid CLEANFILES+= walk_includeoid.res walk_includeoid.exp walk_includeoid: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPWALK} -v2c -cpublic 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= walk_excludeoid CLEANFILES+= walk_excludeoid.res walk_excludeoid.exp walk_excludeoid: > $@.exp ${SNMPWALK} -v2c -cpublic -CI 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= walk_summary CLEANFILES+= walk_summary.res walk_summary.exp walk_summary: OID=system; while true; do OID="$$(${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 "$$OID")"; [ -n "$${OID%sys*}" ] && break; printf "%s\n" "$${OID}"; OID="$${OID%% *}"; done | grep -v ^sysUpTime.0 > $@.exp wc -l $@.exp | awk '{printf("Variables found: %d\n", $$1 + 1)}' >> $@.exp ${SNMPWALK} -v2c -cpublic -Cp 127.0.0.1 system | grep -v ^sysUpTime.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= walk_skip CLEANFILES+= walk_skip.exp walk_skip.res walk_skip: OID=system; while true; do OID="$$(${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 "$$OID")"; [ -n "$${OID%sys*}" ] && break; printf "%s\n" "$${OID}"; OID="$${OID%% *}"; done | grep -v ^sysUpTime.0 > $@.exp ${SNMPWALK} -v2c -cpublic -Cs sysUpTime 127.0.0.1 system > $@.res diff -up $@.exp $@.res ### SNMP BULKWALK REGRESS_TARGETS+= bulkwalk_simple CLEANFILES+= bulkwalk_simple.res bulkwalk_simple.exp bulkwalk_simple: OID=system; while true; do OID="$$(${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 "$$OID")"; [ -n "$${OID%sys*}" ] && break; printf "%s\n" "$${OID}"; OID="$${OID%% *}"; done | grep -v ^sysUpTime.0 > $@.exp ${SNMPBULKWALK} -v2c -cpublic 127.0.0.1 system | grep -v ^sysUpTime.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= bulkwalk_includeoid CLEANFILES+= bulkwalk_includeoid.res bulkwalk_includeoid.exp bulkwalk_includeoid: printf "sysServices.0 = INTEGER: 74\n" > $@.exp ${SNMPBULKWALK} -v2c -cpublic 127.0.0.1 sysServices.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= bulkwalk_summary CLEANFILES+= bulkwalk_summary.res bulkwalk_summary.exp bulkwalk_summary: OID=system; while true; do OID="$$(${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 "$$OID")"; [ -n "$${OID%sys*}" ] && break; printf "%s\n" "$${OID}"; OID="$${OID%% *}"; done | grep -v ^sysUpTime.0 > $@.exp wc -l $@.exp | awk '{printf("Variables found: %d\n", $$1 + 1)}' >> $@.exp ${SNMPBULKWALK} -v2c -cpublic -Cp 127.0.0.1 system | grep -v ^sysUpTime.0 > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= bulkwalk_skip CLEANFILES+= bulkwalk_skip.exp bulkwalk_skip.res bulkwalk_skip: OID=system; while true; do OID="$$(${SNMPGETNEXT} -v2c -cpublic 127.0.0.1 "$$OID")"; [ -n "$${OID%sys*}" ] && break; printf "%s\n" "$${OID}"; OID="$${OID%% *}"; done | grep -v ^sysUpTime.0 > $@.exp ${SNMPBULKWALK} -v2c -cpublic -Cs sysUpTime 127.0.0.1 system > $@.res diff -up $@.exp $@.res ### SNMP SET REGRESS_TARGETS+= set_string CLEANFILES+= set_string.res set_string.exp set_string: ${SNMPGET} -v2c -cpublic -Oqv 127.0.0.1 1.3.6.1.4.1.30155.42.3.3.0 | awk '{ printf("%sa\n", $$1) }' > $@.exp ${SNMPSET} -v2c -cprivate -Oqv 127.0.0.1 1.3.6.1.4.1.30155.42.3.3.0 s $$(cat $@.exp) > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= set_integer CLEANFILES+= set_integer.res set_integer.exp set_integer: ${SNMPGET} -v2c -cpublic -Oqv 127.0.0.1 1.3.6.1.4.1.30155.42.3.4.0 | awk '{ print $$1 + 1 }' > $@.exp ${SNMPSET} -v2c -cprivate -Oqv 127.0.0.1 1.3.6.1.4.1.30155.42.3.4.0 i $$(cat $@.exp) > $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= set_string_integer CLEANFILES+= set_string_integer.res set_string_integer.exp set_string_integer: ${SNMPGET} -v2c -cpublic -Oqv 127.0.0.1 1.3.6.1.4.1.30155.42.3.3.0 1.3.6.1.4.1.30155.42.3.4.0 | \ awk 'NR == 1 { printf("%sa\n", $$1) } NR == 2 { print $$1 + 1 }' > $@.exp ${SNMPSET} -v2c -cprivate -Oqv 127.0.0.1 1.3.6.1.4.1.30155.42.3.3.0 s $$(head -1 $@.exp) 1.3.6.1.4.1.30155.42.3.4.0 i $$(tail -1 $@.exp) > $@.res diff -up $@.exp $@.res ### SNMP TRAP TRAP_EXEC!= ${SUDO} su -s /bin/sh _snmpd -c '[ -r ${.OBJDIR}/traphandle.sh ]' > /dev/null 2>&1 && printf 'yes' || printf 'no' REGRESS_TARGETS+= trap_simple CLEANFILES+= trap_simple.res trap_simple.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_simple .endif trap_simple: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_ip CLEANFILES+= trap_ip.res trap_ip.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_ip .endif trap_ip: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 192.168.1.1\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 a 192.168.1.1 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_bitstring CLEANFILES+= trap_bitstring.res trap_bitstring.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_bitstring .endif trap_bitstring: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 "a"\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 b '1,2,7' # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_counter32 CLEANFILES+= trap_counter32.res trap_counter32.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_counter32 .endif trap_counter32: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 20\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 c 20 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_decimal CLEANFILES+= trap_decimal.res trap_decimal.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_decimal .endif trap_decimal: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 "hello world"\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 d '104 101 108 108 111 32 119 111 114 108 100' # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_integer CLEANFILES+= trap_integer.res trap_integer.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_integer .endif trap_integer: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 42\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 i 42 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_null CLEANFILES+= trap_null.res trap_null.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_null .endif trap_null: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 n ignored # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_oid CLEANFILES+= trap_oid.res trap_oid.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_oid .endif trap_oid: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 iso.org.dod\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 o 1.3.6 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_string CLEANFILES+= trap_string.res trap_string.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_string .endif trap_string: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 "hello world"\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 s "hello world" # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_timeticks CLEANFILES+= trap_timeticks.res trap_timeticks.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_timeticks .endif trap_timeticks: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 420\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 t 420 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_unsigned CLEANFILES+= trap_unsigned.res trap_unsigned.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_unsigned .endif trap_unsigned: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 420\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 u 420 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_hex CLEANFILES+= trap_hex.res trap_hex.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_hex .endif trap_hex: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 "hello world"\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 x '68 65 6c 6c 6f 20 77 6f 72 6c 64' # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res REGRESS_TARGETS+= trap_multi CLEANFILES+= trap_multi.res trap_multi.exp .if ${TRAP_EXEC} != yes REGRESS_SKIP_TARGETS+= trap_multi .endif trap_multi: printf 'localhost\n127.0.0.1\niso.org.dod.internet.mgmt.mib_2.system.sysUpTime.0 100\n' > $@.exp printf 'iso.org.dod.internet.snmpV2.snmpModules.snmpMIB.snmpMIBObjects.snmpTrap.snmpTrapOID.0 iso.org.dod\n' >> $@.exp printf 'iso.org.dod.8 "hello world"\niso.org.dod.9 42\n' >> $@.exp > trap_output ${SNMPTRAP} -v2c -cpublic 127.0.0.1 100 1.3.6 1.3.6.8 x '68 65 6c 6c 6f 20 77 6f 72 6c 64' 1.3.6.9 i 42 # Give snmpd some time to write out the data sleep 0.1 cp trap_output $@.res diff -up $@.exp $@.res .include